During the past month or so I’ve implemented a few more enhancements to PowerSDR-OpenHPSDR mRX PS, summarized below. They were included in release 3.4.3. CTUN mode continues to have quirks but I think it’s operating much better than before. Improved … Continue reading →
You may have noticed that the behavior of the VFO and filters is different with CTUN on vs. CTUN off. The only difference in behavior that should happen is that with CTUN on, the spectrum (panadapter) should stay constant (i.e. … Continue reading →
This describes modifications I’ve made to the Midi2Cat package from Andrew Mansfield, M0YGG, as of this date. They should appear in the next release of OpenSDR/PowerSDR mRX PS (hereafter referred to simply as OpenSDR). They were first applied to version … Continue reading →
The radio is mostly configured now and I’ve used it in several QSOs, including 38 contacts in the Michigan QSO party last weekend. I’ve receive three unsolicited “good audio” reports – unusual for me. I probably sound better on SSB … Continue reading →
After my ramblings about the code and discovering how to get the PL-1 working, I thought I ought to document some kind of summary. So here it is. Setting up the various controls work as before in Px (see previous … Continue reading →
Here are some comments about the LED lights in the Behringer CMD, PL-1 based on what I’ve learned in the past two weeks or so of playing with the PowerSDR source code to make it work with the PL-1. This … Continue reading →
I modified the code handling messages from the Behringer CMD PL-1 to enable it to separately control VFO A and VFO B, and toggle between the two using one of the other buttons. To set up the two VFOs (two … Continue reading →
The first thing of any complexity that I tried to do with the source code for PowerSDR OpenHPSDR mRX PS (hereafter referred to as Px) was to try getting my PL-1 controller to work properly. Although M0YGG’s code works quite … Continue reading →
I started experimenting with the source code for Px (which I’ll use as shorthand for PowerSDR OpenHPSDR mRX PS), using the 3.3.9.0 version downloaded from TAPR, here. I’m using the W5RC branch, in the PowerSDR_OpenSDR_mRX_PS directory, which has the number … Continue reading →